The Sprite TL-400 dispenses two liquid laundry supplies into any top load or small capacity washing machine. The Sprite TL promotes the safe and economical use of laundry supplies by ensuring that an accurate amount of chemical is automatically added to every load. The Sprite TL allows the user to select from four different programmable formulas so that varying soil loads can be dealt with more effectively. The versatile Sprite TL operates either manually or by electronic activation and features a programmable “double dose” lock-out function.

■ Three Modes of Operation

Automatic Mode
When in Automatic Mode, the dispenser receives signals from supply outputs on the washing machine, and runs the corresponding pump for the programmed time in the formula selected.

Sequence or Occurrence Mode
When in Sequence or Occurrence Mode, the supply signal wiring is connected to the hot and cold water valves of the washing machine. Based on the cycling on and off of the valves (sequence or occurrence) pumps run for the programmed time at the sequence or occurrence number assigned to the pump during the programming process. A signal qualifying time may be programmed to ignore short on/off cycling of the valves.

Push Button Mode
When in Push Button Mode, the pump run times are programmed for each formula, and a formula is activated by pressing the Enter button on the dispenser. The formula number displayed will begin as soon as the Enter button is pressed. Delays may be programmed to allow for washing machine fills.

■ Stopwatch Style Programming
No need to convert time and ounces.

■ Spring Loaded Spinners
Spring loaded spinners result in extended squeeze tube life.

■ Built-In Load Counter
Formula load counts are automatically logged, and can be reset.

■ Pre-Wired
The SPRITE TL is pre-wired at the factory. There is no need to open the cabinet during normal installation.

■ Quick Change Squeeze Tubes
Captive Thumb Screws on pump covers allow for quick “no tools” squeeze tube changes.

■ Password Protected
A three digit PIN protects your programming from unauthorized access. The password PIN may be changed to a custom PIN via the programming menu. THERE IS NO COMMON BACK-DOOR PASSWORD.

PUMP
Output - 6.0 oz/min (177ml/min)
Pump Tube Material - EPDM standard, optional silicon tubes available
Pump Spinner - spring loaded, dual roller