The PULSAR P/B dispenses small amounts of liquid chemicals with a high degree of accuracy and repeatability and the added convenience of a separately wired push-button to start the cycle. Simple mounting, setup and low cost make it ideal for single product applications.

Two front potentiometers control Pump Run Time (1 second - 3 minutes) and Delay Time (0 - 3 minutes). The rear-located potentiometer can be used to set a Lockout period (0 - 30 minutes) that temporarily disables the push-button after the initial press and prevents accidental re-dosing during a wash cycle.

A constant, green LED indicates power to the pump. A flashing green LED indicates that a delay or a lockout period is in progress.

Features
■ Push Button Operation
■ No Menus or Programming
■ Simple, Manual Adjustments for Pump Run Time and Delay
■ Lockout Timer

Ordering Information
PULSAR P/B Pump, Complete, 100-120VAC - P/N 00-08879-115,
PULSAR P/B Pump, Complete, 200-240VAC - P/N 00-08879-230

Size
3" W x 4.5" H x 4.5" D (7.6 cm W x 11.4 cm H x 11.4 cm D)

Weight
1.8 lb. (.82 kg)

Power Rating (specific to each model's voltage)
(a) Model 100-120VAC nominal (+/- 10%), 50/60 Hz, 0.2 amp.
(b) Model 200-240VAC nominal (+/- 10%), 50/60 Hz, 0.1 amp.

Flow Rate
6 oz. (177 ml.) / minute with standard Detergent tube

Run Time
0.1 - 3 minutes

Duty Cycle
50%, three minute maximum run time