|
 |
| Pro-Flow Dispenser & Remote Programmer |
Pro-Flow is a compact, easy-to-use dispenser of natural enzyme chemistries that dissolve grease, food and other organic matter in drains and pipes. Pro-Flow automatically dispenses product based on preset formulas and does not need user action to start or stop operation.
Pro-Flow is programmed at installation, via the installer’s hand-held Remote Programmer. The remote is designed to program one or multiple
units, with point-and-click ease. Rather than repeatedly entering similar formulas into each customer’s dispenser, three formulas are stored
in the remote’s memory and “beamed” via infrared (IR) technology to the chosen dispenser. By combining easy dispenser installation with
point-and-click programming, the Pro-Flow keeps drains operating efficiently, thereby:
■ Avoiding Costly Rooter Cleanings
■ Eliminating Odor and Reducing the Need for Odor-Control Technologies
■ Using Safe, Natural Enzymes Instead of Harsh, Alkaline Chemicals
|
| Features |
Remote Programming -- All programming, time settings and operational status information is “beamed” between the installer’s handheld remote programmer and the Pro-Flow, with “point -and-click” ease.
Cost Effective — Simple installation, and the
Remote Programmer’s “enter once, program many” feature, means lower installed and total cost over the life of each unit—and less
installation time.
Easy to Mount — Mounts in just minutes with either peel and stick “hook-and-loop” fasteners or wall anchors & screws.
No User Training Required — The Pro-Flow operates automatically, throughout the week, using pre-programmed formulas. The dispenser
has no operating buttons or specific language requirements. No need for the customer to turn the Pro-Flow on or off! Two LEDs indicate lowbattery and power-on status.
Compact Size — A Pro-Flow dispenser has the footprint of a 3 x 5 index card and doesn’t need to be within reach. This makes Pro-Flow ideal
for those small, hard-to-get-to spots—under a sink, on a wall, or mounted on an out-of-the way product container.
Language Neutral Dispenser — The Pro-Flow operates consistently, regardless of the user’s language. Two LEDs are clearly labeled
with universal icons to indicate low-battery and power-on.
Choice of Installation Configurations — No need to be near a power outlet. You can use either a wall transformer or battery box to power
Pro-Flow. Mount it on a wall, on the side of a machine, or on our custom product container lid.
|
| Sales & Support |
Questions? Contact Nova Controls Customer Support at 800-252-6682.
Pro-Flow Dispenser
with Wall Transformer
115 VAC, 60Hz
P/N 00-08105-1100 |
 |
Pro-Flow Dispense
with Battery Pack
P/N 00-08100-110 |
 |
Pro-Flow Dispenser
with Product Lid
P/N 00-08110-110 |
 |
Handheld IR Remote Programmer
P/N 55-08095-00 |
 |
| |
|
|
| Ordering Pro-Flow Components Installation & Operation Guidelines |
Install Pro-Flow indoors on a vertical surface or product container lid.
After installation, the customer experiences hands-free dispensing and
can view two LEDs with universal icons for POWER-ON and LOW BATTERY. After setting the Remote Programmer’s current
day and time, choose either the factory pre-set formula (3 oz./Midnight/Every Day) or modify it to suit your customer’s needs. A built-in battery backup maintains the 24-hour clock and up to
three programmed formulas regardless of whether the dispenser is powered ON or OFF. During service calls, “beam” a formula to any
Pro-Flow dispenser and/or check the dispenser’s battery life and currently used program with the press of a button. At installation (or after product container changes) press the prime button on either the remote or the dispenser for uninterrupted product supply.
|
| Specification |
Size–5.18” W x 3.5” H x 1.9” D13.2cm W x 8.9cm H x 4.8cm D
■ Weight–5.6 lbs. (159g)
■ Electrical–100-240 VAC, 50-60 Hz, 1 A
■ Total Amp. draw during operation—400 mA
■ Pump Flow Rate– 180-200 ml./min. |
| |
|
|
|
|
 |
